DEVELOPMENT
-
2024
- March 2024: Provincial manufacturing single champion enterprise approved
- March 2024: Joint-stock company established
- May 2024: Municipal enterprise-school joint innovation center registered
-
2023
- April 2023: Jiangsu Botao Phase II plant 12,000 square meters started construction
- April 2023: On April 9, the construction of the 5,400㎡ polyester plant No. 3 started
- June 2023: Provincial service-oriented manufacturing demonstration enterprise approved
- July 2023: National-level specialized and new technology giant approved
- August 2023: Recognized as a provincial green manufacturing (green factory) enterprise
- July 2023: Jiangsu Botao Line 4 installed, trial run successfully
- December 2023: Recognized as a provincial enterprise technology center
-
2022
- March 2022: Jiangsu Botao Line 2 installed, trial run successfully, officially put into
production
- April 2022: The company's listing preparation group was officially established, and
cooperated with Everbright Securities, Zhongshen Zhonghuan Club and law firms to guide the listing work
- August 2022: Cooperate with Tianfeng Securities to guide the listing work
- October 2022: Lianyungang Municipal Party Committee Deputy Secretary and Mayor Fang Wei
came to Jiangsu Botao Company for research
- November 2022: Hong Kong Yintegu Company's equity transfer to Hubei Botao Synthetic Fiber
Co., Ltd.
- November 2022: Jiangsu Botao Line 3 was installed, the trial run was successful, and it was
officially put into production
-
2021
- January 2021: Provincial-level specialized and new technology giant approved
- February 2021: Lianyungang Municipal Party Committee Secretary Xiang Xuelong came to
Jiangsu Botao for research
- May 2021: No. 10 polypropylene production line was completed and put into production, with
an annual output of 10,000 tons
- May 2021: Jiangsu Botao Phase I plant was completed and put into use, and equipment was
installed at the same time
- August 2021: The new crown pneumonia affected the city of Duodao District, and nearly 200
people moved into the company to carry out production and operation, achieving victory in anti-epidemic
and operation
- October 2021: Polyester Warehouse No. 2 was completed with a construction area of 728㎡
and put into use
- December 2021: Construction of Green Ring No. 4 plant completed, with a construction area
of 2190㎡; polyester cleaning workshop plant completed, with a construction area of 2880㎡
- December 2021: Jiangsu Botao Line 1 installed, trial run successfully, officially put into
production
-
2020
- January 2020: Introducing the Amoeba business model, establishing an Amoeba new structure,
and introducing the Amoeba business philosophy
- February 2020: Jointly fighting the COVID-19 pandemic, nearly 100 employees moved into the
company to carry out production and operations, stabilizing the market
- March 2020: Donghai County Development Zone centralized groundbreaking ceremony
- October 2020: The company's 20th anniversary celebration, a grand luncheon was held at
Jincheng Hotel, and the leaders of Jingmen City, government departments and social groups were invited
to attend
- November 2020: No. 11 polypropylene production line was completed, installed and put into
production, with an annual production capacity of 6,000 tons
- December 2020: Construction of the first phase of Jiangsu Botao's 18,000 square meter
factory started
-
2019
- June 2019: Introducing Jianfeng Consulting Management System, establishing a new
organizational structure, and gradually establishing and improving the management processes of various
departments
- September 2019: Signing an investment agreement in Jiangsu Donghai County Economic and
Technological Development Zone, investing 1.5 billion yuan to build Jiangsu Botao New Materials Co.,
Ltd.
-
2018
- December 2018: Annual sales revenue approached 500 million yuan for the first time
-
2016
- January 2016: The Municipal Intermediate People's Court auctioned the assets of the former
Jiaxin Technology Development Co., Ltd., including 48 acres of land, three factory buildings of 9,729
square meters, and office buildings, with an auction price (auction) of 11 million yuan, and then added
1 million yuan for renovation costs
- March 2016: The new 12,000-ton polypropylene production line (Line 8) was installed and
debugged and put into operation in August
- August 2016: A wholly-owned subsidiary, Hubei Green Ring Chemical Fiber Co., Ltd., was
established, with an investment of 40 million yuan to build an environmentally friendly PLA polylactic
acid staple fiber project (Line 8)
- September 2016: A new 20,000-ton functional polypropylene staple fiber project was
launched. The production line (Line 9) was installed and debugged in April 2017 and successfully put
into production at one time
-
2015
- September 2015: Polyester Factory 2# Plant, 1# Warehouse put into construction
- November 2015: Under the coordination of the leaders of Jingmen High-tech Zone, the
follow-up development issues of the bankrupt enterprise Hubei Kenong Agricultural Machinery Co., Ltd.
were not resolved. The company's 70 acres of land and three plant buildings with a construction area of
more than 10,000 square meters were acquired for 8 million yuan
-
2014
- January 2014: 1# production plant, 1# dormitory building, power distribution and boiler
production room construction completed
- April 2014: A new polyester production line with an annual output of 10,000 tons was
installed and put into use
- August 2014: Three new polypropylene production lines were purchased, with production
capacities of 6,000 tons, 8,000 tons and 12,000 tons respectively. 6,000-ton polypropylene production
line (Line 5) installed, put into normal operation in July; 8,000-ton polypropylene production line
(Line 7) installed and put into normal operation in August
- October 2014: Recognized as a high-tech enterprise
-
2013
- January 2013: 94.6 acres of land was newly acquired at No. 19 Fuyao 2nd Road, High-tech
Zone, to build a colored recycled polyester project
- February 2013: Land leveling at No. 19 Fuyao 2nd Road, civil engineering construction
started
- May 2013: The polyester project at No. 19 Fuyao 2nd Road officially started construction,
divided into two phases, 30,000 tons in the first phase and 30,000 tons in the second phase
-
2012
- August 2012: A 4,000-ton filament production line was installed and put into use in the
second workshop; a new 6,000-ton polypropylene staple fiber production line was added
-
2011
- April 29, 2011: The second phase of the polypropylene staple fiber project started
construction, and the 8,000 square meters new factory building broke ground. (Workshop 2, No. 248,
Xinglong Avenue)
-
2010
- May 2010: The company's office was moved from Yangwan Factory to the new factory in the
High-tech Zone
- July 2010: The Chemical Fiber Association Polypropylene Professional Forum was hosted by
the Polypropylene Association Professional Committee; the company co-organized and successfully held it
in the Phoenix Garden Hotel in Jingmen City
- October 18, 2010: The company held a 10th anniversary celebration, carried out employee
celebration activities, and held a grand dinner at the Golden Prince Hotel. Invited to attend were
Jingmen City leaders, representatives of various government departments and social groups, company
supplier representatives, customer representatives, and all company employees
-
2009
- June 2009: New production line of 10,000 tons of polypropylene staple fiber spinning with
annual production capacity of Italy VAREMAC was put into use. The equipment arrived at the company in
early July
- August 2009: 10,000 tons spinning production line was installed
- November 2009: 10,000 tons production line (Line 4) was debugged and put into production
- December 2009: New finished product warehouse No. 1, auxiliary material warehouse No. 2 and
raw material warehouse No. 3 were built
-
2008
- March 2008: 8,000-ton production line installed and debugged, put into production
- March 2008: A new batch of contract employees were recruited and trained to work, with 1,
2, and 3 production lines, short-line polypropylene production has begun to take shape, and the annual
production capacity has reached 15,000 tons
- October 2008: Supporting facilities are gradually completed, and the dormitory building is
completed, with 5 sets of three bedrooms and one living room, 5 sets of two bedrooms and one living
room, and 25 rooms with one bedroom and one living room, which basically meet the living needs of
employees. The construction of office buildings and canteens is completed
-
2007
- March 2007: 4,000-ton production line (Line 2) was debugged and put into production
- May 2007: A new plant was built at No. 248 Xinglong Avenue, with a first-phase plant of
3,700 square meters
- September 2007: 8,000-ton production line (Line 3) was installed in the new plant
-
2006
- November 2006: 50 mu of land was acquired in Jingmen Economic and Technological Development
Zone, located at No. 248 Xinglong Avenue, with an investment of 50 million to build a polypropylene
staple fiber expansion project
- August 2006: New Italian polyester and polypropylene staple fiber production lines were
installed, including one with an annual output of 4,000 tons of polypropylene staple fiber production
line produced by PLANTEX; one with an annual output of 8,000 tons of ultra-fine denier polypropylene
staple fiber production line produced by PARE; and one with an annual output of 6,000 tons of
polypropylene filament
- November 2006: 4,000-ton production line was installed, and the equipment was installed in
the factory area at No. 23 Yangwan Road, the city
-
2004
- March 2004: Acquired the Lishi Town Paint Spraying Factory in Shayang County, established
Hubei Hongye Carpet Co., Ltd., and moved the non-woven fabric and carpet production equipment to the
site, and organized installation, commissioning and production.
-
2003
- May 2003: New needle-punched non-woven fabric and carpet projects, non-woven fabric and
carpet production equipment installation, commissioning and production
- August 2003: Acquired the Lishi Town Towel Factory in Shayang County, engaged in the
production and operation of raw products
-
2002
- November 2002: Hubei Botao Synthetic Fiber Co., Ltd. was established with a registered
capital of 10 million yuan
-
2000
- October 18, 2000: Botao Synthetic Fiber Factory was established and settled in Jingmen,
located at No. 23 Yangwan Road, Jingmen City
- October 2000: New Italian PLANTEX annual production of 2,500 tons of polypropylene staple
fiber project